CraneVeyor Corp.CraneVeyor logoCrane Manufacturing

CraneVeyor TranStation® Free Standing Crane Systems® Free Standing Cranes

More
TranStation
Information
PowerPoint PresentationSlide presentation

Over 20 years ago we designed and built the TransLifter line of underhung Free Standing work area cranes, and in 1998 we integrated our experience into the TranStation Free Standing enclosed track work area cranes. Enclosed track cranes are an economical and efficient system for manually moving loads up to 4000# with approximately 1 pound required to move 100 pounds. TranStation Free Standing systems have features and benefits that set this product above the rest for ease of operation, ruggedness and value. See the following TranStation Free Standing Crane information:

CraneVeyor TranStation

Free Standing TranStations are entirely self-supporting and independent of the building structure, with no need for bracing or building tiebacks, and only require a 5" concrete slab. Other "free standing" systems need help to stand alone and require sway bracing to reduce movement and at least a 6" reinforced concrete floor for support. Since no extra support is required Free Standing TranStations are the best choice for outside installations and other open areas.


CraneVeyor TranStation

The Free Standing structure is engineered to rugged seismic zone 4 requirements. You receive the benefits of this more rigid and durable system as a standard. The rigid frame has unique 45 degree connections and structurally rigid runway connections. Structural steel tubing is used for the frames and all bolted ASCE approved connections are provided, unlike other manufacturers who use clamp/slip connections. The low profile design requires minimum headroom. The modular design makes it easy to add sections or to relocate.


CraneVeyor TranStation

Because TranStation cranes are so easy to move the runways must be level. Columns are installed using anchors with leveling nuts for up to 1" adjustment of the columns to compensate for uneven floors. For more deviation, columns can be ordered different heights. The bases are grouted after leveling for full bearing on the slab (nominal 5", 2500 psi concrete) so soil bearing pressure under the slab is less than the 1000 psf allowed by the Uniform Building Code.


CraneVeyor TranStation

Systems are pre-engineered, easy to order, simple to layout and easy to install. There are hundreds of models for 250# thru 4000# capacity, 34' bridge lengths, up to 14' hook bearing height and 30' runway spans, and unlimited runway lengths. Select the model closest to your requirement and we will adjust the details to your requirements. A dimension drawing is provided for your review and approval prior to manufacture.


CraneVeyor TranStation

TranStation Free Standing systems include:

  • Enclosed track bridge, with end trucks, stops and trolley for a hook-on hoist/device.
  • Enclosed track runways, complete with support frames, hanger assemblies, splice assemblies and mounting hardware. Even the floor mounting bolts and grout are included.
  • Festooned electrical system for bridge and runway, complete with trolleys, 4-conductor #14 flat cable, clamps and stack-up system.
  • A layout drawing, assembly instructions, and manuals are provided with each system.
  • Click here to see the CraneVeyor TranStation Slide Presentation

    CraneVeyor TranStation

    CraneVeyor Above the rest since 1946

    HOMECOMPANYPRODUCTS & SERVICESCONTACTEMPLOYMENT

    CraneVeyor Corp

    CraneVeyor Corp
    1524 No. Potrero Ave., P.O. Box 3727, South El Monte, CA 91733
    (888) 501-0050 • Fax: (626) 442-7308 • Outside CA (800) 423-4180
    cranehoistsales@craneveyor.com